I'd like to capture audio effects and maybe even some images or video for 3D model reference from DVD's.
I don't need to copy the discs outright.
Any good software out there for doing this kind of thing?
Thanks.
Have fun!
Ripping Image/Video/Audio to files?
Moderators: Admin, Moderator Team
-
- Senior Member
- Posts: 187
- Joined: Tue Dec 03, 2002 10:30 pm
- Location: Philadelphia, USA
- Contact:
I've used BackupDVD to extract both stills, video and audio from dvd. You use it basically the same as if you were going to convert the DVD to and VCD but when you select the output type choose AVI. This enables a couple of extra things in the dialogue, notably video and audio codecs.
For extracting just the audio select 'Store to WAV', this will down mix the source to a stereo 44.1kHz WAV file.
To get at the video uncompressed select the video codec and choose the 'Full frames uncompresed' . Remember if you only want 1 frame set the 'Max frame' edit box to 1, and also remember to set the resolution to 720X576(for PAL) or 720X480(for NTSC).
To get at the file as something more useful like a JPG or GIF etc I just used Corel Photopaint but almost any picture editor will do.
Adam C
For extracting just the audio select 'Store to WAV', this will down mix the source to a stereo 44.1kHz WAV file.
To get at the video uncompressed select the video codec and choose the 'Full frames uncompresed' . Remember if you only want 1 frame set the 'Max frame' edit box to 1, and also remember to set the resolution to 720X576(for PAL) or 720X480(for NTSC).
To get at the file as something more useful like a JPG or GIF etc I just used Corel Photopaint but almost any picture editor will do.
Adam C
Have a look at VCDHelp.com
I use a program called Smartripper to extract the data from a DVD and then a program called TMPGEnc to convert to VCD. This program could also be used to extract particular scenes in a variety of formats. VCDHelp is probably the best site out there for this sort of stuff although at first it may seem a bit complicated. Hope this helps ....
I use a program called Smartripper to extract the data from a DVD and then a program called TMPGEnc to convert to VCD. This program could also be used to extract particular scenes in a variety of formats. VCDHelp is probably the best site out there for this sort of stuff although at first it may seem a bit complicated. Hope this helps ....