Tips on getting good sound production?

All aspects of sound and sound editing including MP3.

Moderators: Admin, Moderator Team

Post Reply
Vamp
Forum Addict
Forum Addict
Posts: 941
Joined: Mon Dec 01, 2003 4:49 pm

Tips on getting good sound production?

Post by Vamp »

Sound plays a big role in the professionalism of a movie... I have a 20 gig MP3 Player which I can connect to the Audio Out of my Camera and record with astonishing clarity and no background hum, which is great! Although I havn't used it in a proper movie yet because it's been out of commision till I get it fixed, but anyways, what other inexpensive tips are there that don't need any other microphones? Adobe Audition tips? When editing should I take all the one channel, mono sound from my camera and copy +paste it into the other channel so that one channel isn't just a low buzz?

Any editing tips with sound? Obviously sound continuity is a big thing because it's distracting when sound jumps between cuts, so obviously I should record a few minutes of background sound for each scene and place it as a basis for the sound of a scene... Any other tips?
www.neverdead.co.nr
mark_essex_87
Posting Freak
Posting Freak
Posts: 248
Joined: Fri Sep 26, 2003 5:02 pm
Location: Essex, UK
Contact:

Post by mark_essex_87 »

If you have an audio editor such as Wavelab you will be able to tweak the audio in any way possible with VST/DX plugins etc. Just export from Premiere and Import to Wavelab, and reverse the process to bring it back in.

Do a low-cut to remove low buzz, and a hi-cut to remove and hissing, that for a start should make it sound alot better. Also, I'm not sure if film's use compression for audio? - It may make it sound a lot better (no overly-loud, or too quiet) sounds. :)
[url=http://www.downfallband.co.uk]Downfall Band[/url] < Now With 2 Songs! ;)
User avatar
reflexive_cinematics
Posting Freak
Posting Freak
Posts: 231
Joined: Thu Apr 01, 2004 11:04 pm
Location: Wisconsin, USA
Contact:

Post by reflexive_cinematics »

Just make sure when your recording , your using the correct type of mic and getting your levels up there. Don't hit the limit though when recording digitally, because it will clip. Getting the most signal to noise is the most important. Good idea for sound is enhance what you can and replace what you need to.
[url=http://www.reflexive-cinematics.com][img]http://reflexive-cinematics.com/images/sigbanner.jpg[/img][/url]
U.S.Amateurfilmaker
Forum Addict
Forum Addict
Posts: 923
Joined: Wed Jul 30, 2003 8:59 pm
Location: New Jersey, USA
Contact:

Post by U.S.Amateurfilmaker »

Yeah, a lot better to record sound that's a little low and to raise the volume a little than sound that tops the audio meter. As far as an mp3 player, i wouldn't go that route simply because some devices will go out of sync after a while. However, since the audio is being recorded onto the tape as well as sort of a backup, I guess it doesn't matter.

As far as mics, I have an $80 sony condenser mic that works great, and records extremely clean audio. Your cam mic may work just finre, but I had to get the external mic because my cam has an exteremly loud motor hum.
CEO
Dimension 9 Studios
drumtracks
Newbie
Newbie
Posts: 5
Joined: Fri Sep 17, 2004 10:13 pm
Location: USA
Contact:

Post by drumtracks »

You can run your audio through an Expander to lower your noise floor to reduce or eliminate hum or hiss during the editing process.
Tartar Drum Studios
http://www.TartarDrumStudios.com
Post Reply