Hello,
I have got a NVidia Geforce4 Ti4600 card from MSI and use NV WDM 1.2.2 drivers for capturing.
Now I want to capture pictures from a NTSC VHS cassette with PAL video recorders (already tried a few).
Sadly I could only see B&W pics on the PC, on TV it shows normally in colour.
I played around with registry-entries and found out to my surprise that the value "VideoStandard" was set to NTSC but NTSC wasn't shown correctly.
When I set it to PAL, PAL images showed better and NTSC showed a little colour but was flickering badly due to different frequency.
What other values could I set to see NTSC in colour?
Again:
- VideoStandard NTSC:
PAL in colour a little streched vertically
NTSC B&W
- VideoStandard PAL:
PAL in colour
NTSC a little colour but flickering badly
Thes are the other registry-entries
Thanks a lot for your help!
Greetings,
Roni
NTSC video only b&w!
Moderators: Admin, Moderator Team
Hello,
No, I'm using composite connectors.
Everything connection-wise seems to be fine.
S-VHS could be possible with composite+adapter...
Also don't know how it could be the connection if PAL video is in perfect colour...
Greetings,
Roni
[Edited on 20-9-2003 by ronik24]
[Edited on 20-9-2003 by ronik24]
No, I'm using composite connectors.
Everything connection-wise seems to be fine.
S-VHS could be possible with composite+adapter...
Also don't know how it could be the connection if PAL video is in perfect colour...
Greetings,
Roni
[Edited on 20-9-2003 by ronik24]
[Edited on 20-9-2003 by ronik24]