Can someone give/make Gun figures?

EstonianMovemaker · Post by **EstonianMovemaker** » Mon Jan 30, 2006 9:06 pm

I saw that matt has made AK figures, but I need thompson half automatic mashine gun figures.
plz help
Mazz, if s1 remembers me.

XhuntedoverlordX · Post by **XhuntedoverlordX** » Tue Jan 31, 2006 12:25 am

Are you asking for templates or for fully built Thompson models?

BTW, what are the Thompson models for? If they're for a war movie you'll probably want the M1 model, if its for a gangster flick I'd personally go with an M1928 (the ones with vertical foregrips that are compatible with drums).

UFProductions · Post by **UFProductions** » Tue Jan 31, 2006 6:54 am

Give me a week or so and I'll have my Thompson pattern up, I've just got to find it.

UFProductions · Post by **UFProductions** » Fri Feb 03, 2006 2:26 am

Alrighty, found the templates, scanned 'em and here they are. I drew the whole thing to scale, then cut out the pieces, which were transfered onto wood, then cut out and shaped. The barrel was made from wooden dowel, the scan does not reflect the actual shape, only included as reference for size and scale. Everything will not be to scale, you will have to figure that out on your end when you print. I've included my original printout with all of my meaurements to help out with that. Best of luck, here's the scans:

Stock/Magazine

Foregrip/Trigger/Sight

Reciever (Two Parts, stitch together at the dotted line.)

Barrel

Measurements

And yes, they are all misnamed as the 1928, it's the M1. Have fun!

EstonianMovemaker · Post by **EstonianMovemaker** » Mon Feb 06, 2006 7:30 am

Well, i tuned the figures for many hours, and i saw that, here are many mistakes, i tuned myself somthing up

Weel but thanks!
Do you have a pic of your own " gun "??

UFProductions · Post by **UFProductions** » Tue Feb 07, 2006 4:37 am

Yeah, they didn't take too well to being scanned, it's a lot easier when you've got the hard copies. My gun is long gone, as are the photos (in my last HDD reformat), so no other record of it's existance exists. The movie it was created for never made it past the pre-poduction phase, it was more just something to make over a boring weekend.

Mazz · Post by **Mazz** » Sat Mar 04, 2006 8:32 pm

currently making somthing see the picture here:
http://www.zone.ee/funnyday/tommy.html
Anyone got other figures?Mauser k89?Mosin nagat or smth?All are welcomed!
Estonian aka Mazz