MattHawkins Online - Film Making Forum

Summer 1997,
We were just as bad at estimating how long projects would take back then !

Try using an inspection light, supplied from a DIY shop.

Ok,
Took a little longer than I was hoping the counter stuff I allready had was hours:mins:secs.

Here are the files Counters

Yeh I can do something in lightwave, what colours position fonts etc do you need

Yeh Ok it is finished and the venue for the premiere has been booked !

Does anyone know if it is legal to cover a song and use it in a movie? No, like any released cover you should be paying royalties. copyright usually still held by an estate? Unless you are using an prerecorded version by an orcestra or artist you should be ok. Also if you are not releasing the film ...

Try a full sized keyboard in the laptop if problem still occurs then it is software otherwise it is hardware.

No sorry, Had another look and the switch part is not actuallly part of the microphone but part of the K6 power module which is where the confusion arises. Full range of K6 microphones http://www.sennheiser.com/sennheiser/icm_eng.nsf/root/products_microphones_k6 As I said it is a switchable filter h...

It looks as if it is probably a frequency response switch. The _ position indicates a flat frequency response and the /-- indicates a high pass filter i.e. reduces lower frequecies amplitudes. At what frequency this filter switchs in I dont know.

Goldwave HAs a really good noise redcution.
Yiou select a section of audio which has just the noise ie when there is no dialogue.
It then creates a filter based on the example audio and applies it to all of the track.

Generally pretty good. Concrened how you are going to achieve some of the shots without alot of CGI. [quote] “Rineheart, you and Patricks move along the right side of these tracks and get next to that gun crew; me and Tompkins will provide suppressing fire. I’ll see if we can get an air...

Go to greek restaurant they smash plates, they might even let you film there

You could use cat 6 cable screen twisted pair it will do better if it is an electrically noisey area, it will be more expensive as well

Set the first play to the video you wan and then set the end action of the video to be the main menu

Yes all the music is original

Yep different things involved but each one is a overnighter

Ok rethink over, added a couple of shots (after trying three or four versions)

starting rendering again


(Going to singapore on sunday so might not get everthing finished)

With something like Adobe premiere you can achieve this effect using a motion/size effect

Just use the motion fixed effect( allready on every bit of footage). Turn off aspect ratio and make the width 50 % change the X axis position to half its current value. place the right hand side footage in another layer a do the same to the width but multiply the x pos value by 1.5

What is a track matte? A track matte is a movie or sequence of frames that contain transparency information. This usual done as a black and white image where one colour is transparent and the other is not, grey levels can also be used for semi-transparent How do I make one Take a copy of your origin...

Really well made, cheers for posting it. Have you submitted it to the film gallery ?

Yes this will work and not too hard. Do what you describe but rather than create a track matte if you have a single frame of the street with no cars visible then you can use a difference matte to key the traffic. If you dont have any suitable footage for the difference matte then you need to create ...

If you have an AMD processor Premiere Pro only works with XP type processors. I would recommend 1Gig of RAM as well.

You could use a visualisation in something like winamp or media player